الملحقات الملولبة
Threaded rod, anchor bolts, couplers, hexagon nuts and washers in matched sizes and finishes.
Rod, connectors, nuts and washers are supplied in matching sizes and finishes, so a hanger never mixes coatings — a zinc-plated nut on a stainless rod, for example, will corrode. To hang services from steelwork without drilling or welding, see the beam clamps.
Fully threaded rod runs from M6 to M20 in 2 and 3 m lengths, and the rated load of each size is given on its product card.
16 products from catalogue KAVITY-10 — material, finish, sizes and codes as published. Each card links to its catalogue page.
J-bolt for attaching to a beam flange or purlin, or for use as a concrete insert.
L-shaped bolt for use as an anchor embedded in concrete.
U-bolt with hex nuts used as a support, guide or anchor for light-duty pipes.
Eye rod for hanger supports, used to eliminate possible bending of threaded rod.
Turnbuckle for length adjustment of hanger rods (rods not included).
Flat washers to DIN 125 / ASTM F436 for channel framing connections.
Large-diameter round washers to DIN 440 and DIN 9021.
Square plate washer for use with all 41/21 and 41/41 series channels.
Fully threaded rod grade 4.6 to DIN 975 / ASTM A36 for hangers and supports.
Round head machine screw to DIN 7985.
Rounded coupler sleeve for joining threaded rods.
Roofing bolt with square nut in low-carbon or carbon steel.
Carriage bolt with square neck below the head to DIN 603.
Hexagon nut to DIN 934 / ISO 4032 / ASTM A563.
Grade 8.8 hexagonal rod coupler with view hole for joining threaded rods.
Hex head bolt to DIN 933 / EN 24017 / ASTM A307, A449, supplied without nut.
Send the project drawings, specification and load requirements. Our engineers size the system and prepare a technical proposal, with the calculation and shop drawings needed for approval.
