مرابط وعلّاقات الأنابيب (كلامبات المواسير)
Rubber-lined and plain clamps, hangers, threaded rods and anchors for pipework from ½ in to 6 in (offset clamps to 8 in).
The EPDM lining is not a finishing detail. It isolates the pipe from the support to reduce the noise carried into the structure (EPDM insulation for sound reduction to DIN 4109), and it keeps a copper or stainless pipe out of direct metal contact with the zinc-plated steel clamp.
Every size carries a rated load, and the range runs from a single ½ in service pipe up to 6 in pipework (offset clamps to 8 in), with matching threaded rod, anchors and beam clamps.
Rubber-lined and plain clamps from ½ in (DN15) service pipe to 6 in pipework, each with a rated load capacity.
View →
Plain, slotted, back-to-back and toothed C-channel with cantilever arm brackets — the framing that pipe clamps and hangers are fixed to.
View →
Threaded rod, anchor bolts, couplers, hexagon nuts and washers in matched sizes and finishes.
View →Send the project drawings, specification and load requirements. Our engineers size the system and prepare a technical proposal, with the calculation and shop drawings needed for approval.
