تسليح جدران الطوب (البلوك)
Ladder and truss reinforcement laid in the bed joint to distribute shrinkage stress along the wall.
Blockwork shrinks as it dries, and a long wall without reinforcement relieves that stress by cracking. Bed-joint reinforcement laid in the horizontal joints spreads that stress along the wall and reduces cracking around openings; it also increases the wall's lateral flexural strength under wind and seismic load and bonds walls together at corners and junctions.
Plaster beads, expanded metal lath, steel lintels, blockwork accessories and blockwork reinforcement are all covered by the same KAVITY-03 catalogue.
6 products from catalogue KAVITY-03 — material, finish, sizes and codes as published. Each card links to its catalogue page.
Expanded metal coil mesh laid in brick and block bed joints to resist tensile stress and reduce cracking.
Welded ladder-type bed joint reinforcement improving tensile strength of brick and block walls under wind and seismic loads.
Prefabricated L- and T-junction units that give continuity to ladder reinforcement at corners and wall junctions.
Welded truss-type bed joint reinforcement with diagonal wires for brick and block masonry.
Prefabricated L- and T-junction units for truss reinforcement; bends and intersections made on request.
Galvanised retainer box keeping connection rods at exact spacing for reliable transfer of shear forces at construction joints.
Send the project drawings, specification and load requirements. Our engineers size the system and prepare a technical proposal, with the calculation and shop drawings needed for approval.
